← Back to Blog

Claude Design Isn't the Problem. Your Design System Is.

By Megan Ratcliff, Partner at Clarity & Motion Collective ·

If everything you make in Claude Design comes out looking like everyone else's, glowing gradients and generic icons included, Megan Ratcliff has an uncomfortable answer for you: the tool is rarely at fault. Megan is not a designer. She presented her slides out of Claude Design, then walked through a full webinar campaign (a teaser deck, a landing page, a social carousel and a teaser video) built from one brief and one design system. This recap covers where Claude Design fits in a GTM workflow, what goes into a design system that actually holds your brand, her four habits for better output, the live build, and a troubleshooting list for when the results drift.



What is Claude Design, and what is it for?

Claude Design is a workspace where you describe what you want to make in plain language and get back an editable visual first draft. Megan put the weight on "first draft." This is generative AI, so don't expect a finished asset in one shot. You'll almost always do some work after the first pass.

Her own use case is explaining ideas she can't sketch. "I am a terrible drawer," she said, so Claude Design lets her show what she means, then either keep going or hand the draft to a professional designer who can take it from there. Designers she works with use it for rapid prototyping.

She was just as direct about the limits. It does not replace a human's eye for judgment and detail, and a person will always be more creative than it is. It's for "good enough": a first iteration, a fast prototype, a way to make an idea visible. If you need something wildly creative, talk to a person.

Should you use claude.ai/design or Claude Desktop?

For now, Megan works in what she called Claude Legacy, the standalone experience at claude.ai/design. About a week and a half before the session, Anthropic started folding Claude Design into Claude Desktop, but she finds that integration still clunky. Your design systems don't carry over automatically, and you get fewer editing and export options. The standalone version has the most features and was the easiest to use when she presented.

Where does Claude Design fit in a GTM workflow?

Megan's point here is that the marketing workflow you already know doesn't change. Claude Design speeds up the middle of it.

Step What happens Who does the work
1. Decide Audience, objective, message, the ask, proof points You, before you open any tool
2. Ground Approved brief, brand system, examples, constraints You, feeding Claude
3. Generate A visual first draft Claude Design
4. Refine Specific, decisive direction on what to change You and Claude Design
5. Review On brand? Claims factual? Legal? Accessible? Data accurate? You, every time
6. Produce Final asset, in Claude Design or outside it Either

Claude Design should shorten steps 2 through 4. Everything else still has to happen. "You still gotta write briefs, people," as Megan put it, and she was firm that you never skip the review step. Refinement isn't vibing either: be clear and specific about the direction you want.

What goes into a Claude Design design system?

In claude.ai/design there is a design systems section where you store one or more systems. Megan treats the design system as the first stop before you make anything, and she spent most of the session's first half inside hers.

Do you need one design system or several?

It depends on what people will make and who will make it. One of Megan's clients runs separate systems: one only for slides, a flexible one for concept graphics and explainer videos, and a third in progress for web and UI/UX. A single system that stays flexible across all of those while enforcing rules that differ for each would be very hard to build. Decide early how many you need and whether the users are executives or a team of designers.

What are the sections inside a design system?

Every design system starts with a README, the spelled-out version of what's in it and where the information comes from. Below that, sections appear as you add material. Megan's includes:

Section What goes in it Megan's take
README Company context and the sources the system draws on Tell Claude to read it first when you prompt
Templates Reusable layouts, such as a deck, LinkedIn or social carousel, or document Highly recommended if you reuse formats; she keeps one deck template so every deck follows the same path
Brand Who your brand is, including archetype She was glad this was included
Iconography Your own icon set Stops Claude from inventing generic icons
Imagery Your actual brand images Claude pulls those exact images into what it makes; works well if you reuse 15 or 20 images
Colors Neutral, primary and accent palettes, with usage notes Spell out when each color is used, for example when persimmon comes in versus saffron versus dusty rose
Components Buttons, cards, inputs This is where you stop everything looking the same
Spacing scale Layout spacing rules She left the defaults alone
Type Font families and scale Pick fonts based on where you export (see below)

Each element can take feedback, direct edits and usage notes, and those notes steer what the system produces. Megan's answer to the complaint that all Claude Design output looks alike is this section: creative agencies she works with have built systems that look nothing like hers. It takes time, energy and a lot of decisions. If the choices start to feel overwhelming and you aren't a brand expert, keep Claude open on the side and ask it to help you decide.

Why does font choice depend on your export tool?

If you live in Google Slides and your brand font isn't a Google font, it won't survive the export. Slides will swap in the closest match. Megan's example was Proxima Nova, which isn't a Google font. If you're starting a brand from scratch, figure out first whether you'll export to Google Slides or PowerPoint and choose a font family that works there. If you already have a brand font, write a fallback rule into the system that names the default font to use when yours isn't available.

How long does it take to set up?

As little as an afternoon if your brand is flexible. A few weeks if it's rigid, because you'll go back and forth writing rules until Claude sticks to them. Megan's minimum to get started is fonts, colors and logos. Add the other sections over time. If you're building from scratch, she suggests blocking a Friday afternoon to work through each section and make the decisions.

What "good" looks like is partly taste. Megan's brand is about a year old, so her test is simple: do I like it, would I want to consume this, and is it "clear, not clever"? If your brand is established, you should already have examples of good work to point to. It doesn't have to be a solo project either. Share it and ask others what they'd change.

Can Claude build a design system if you don't have one?

Yes, if you start with a very clear brief. Megan already had brand guidelines, images and logos to upload. But during one of the weekends when Claude offered extra access to Fable, she had it create a full design system for a fictitious social media company, templates included, and it did quite a good job.

Why use Claude Design instead of a brand skill or plugin?

Plenty of teams already have a brand skill or an enterprise plugin in Claude, and Megan thinks both approaches have a place. The difference is what they carry. A skill or plugin carries text and instructions. It doesn't carry images and logos, so when you ask for them, Claude invents them. A design system pulls from your actual library.

If you're styling a document, a skill may get you close enough to drop into one of your templates and move on. Reach for Claude Design when you need exact images, logos and icons, and want to edit inside the tool. She also sees a fidelity gap: decks made with a skill in Claude Desktop have a certain blockiness, and in Claude Design that goes away.

One admin tip: if your design system is published through Claude Enterprise but doesn't load automatically, ask your Claude admin to set it as the default. Megan's always defaults to her own unless she switches it.

What are the four habits for better Claude Design output?

Habit What it means in practice
1. Start with a brief, always Who it's for, what you're making, constraints, non-negotiables. It can be simple, and you can draft it in Claude first. The brief is what you audit against.
2. Use a design system It takes "so many headaches" out of the process.
3. Build the largest asset first Get one asset close to final before you make anything else. Making everything at once "will be a disaster."
4. Set your expectations It's probabilistic, not deterministic. Expect to get 85 to 90 percent of the way and edit the rest. Flexible brands will love it; rigid ones will need to adjust.

The same logic applies across asset types. Break the work down (PDFs, presentations, web pages), give examples for each, and the output lands much closer to 90 percent. Megan called that a core AI fluency lesson: break your problem down.

What did the live demo build?

Megan's scenario was a webinar titled "How to Build an AI-Enabled Go-to-Market Team Without Creating More Tool Chaos," aimed at VPs of Marketing, Demand Gen, RevOps and Sales Enablement. The call to action was registration. The plan was four deliverables: a six-slide event teaser, a one-page event overview (in practice, a landing page), a social media carousel and a teaser video.

What did the prompt and brief include?

The brief was longer than most: event format, the business problem, the audience, what they care about and what they're skeptical of, the event promise, desired outcomes and core content points. Her prompt then carried audience, objective, source of truth, narrative, structure, design direction and explicit exclusions. In practice it requested:

  • A six-slide teaser deck for the virtual session, with a short audience description
  • The attached brand system and campaign brief
  • Only the claims in the reference document
  • A clear, pragmatic, executive-friendly tone
  • No generic robots or sci-fi imagery
  • A 16x9 presentation format

She attached the brief, selected her design system (you can also pick a template) and let it run. She admitted Claude helped her write that initial prompt from her brief.

One instruction she uses constantly is "be clear, not clever." It cut down a lot of word-salad headlines. She also said Opus 5.5 has brought Claude's language back to sounding natural, with fewer garbled headlines than before.

How do you edit the first draft?

The first version of slide 2 was, in her words, underwhelming. You have two editing tools: comments, which you place on a specific spot and send back to Claude, and direct editing, for when you just want to rewrite a title yourself. Her fix was a specific comment: slide 2 is underwhelming, bring in an image from the image library that speaks to chaos turning into clarity. Claude redesigned the slide around one of her library images.

Be that specific every time. "Can you spruce up slide 2 a little bit?" gets you something, but it might turn into chaos. Comments help you point at the exact element. She also removed the small labels Claude Design likes to put above headlines, known as eyebrows. If you don't like them, ban them in your design system.

How do you turn one asset into a campaign?

Once the deck was where she wanted it, Megan started a new chat (her rule: always start a new chat when the scope changes) and requested a teaser video, a carousel and a landing page based on the deck. All of them live as sub-projects inside the same project, so the campaign stays together.

  • Landing page: matched the teaser's look and included a working mock registration form with a "you're on the list" confirmation. It shows the user experience, but you'd still have to wire it up for real. To publish it, you can deploy through GitHub, Lovable or wherever you publish web pages.
  • Teaser video: a short animated explainer. You can't add voice inside Claude Design right now. Megan exports animations to Canva or Google Vids and adds the voiceover there, which is how she makes a lot of her videos.
  • Carousel: built from the same message, ready to edit.

What are the export options?

From the share menu you can invite colleagues to review and comment first, approve the changes, and let Claude apply them. Export options include PDF, HTML, PowerPoint, Canva, Google Slides and HubSpot. If that's too much, ask in the chat for a JPEG and download it.

How do you get brand imagery that doesn't look AI-generated?

Claude Design doesn't create images. Megan made her brand images in ChatGPT's image generator, working from a brief. It took her a few hours and several versions of that brief to find the words for the style she wanted, which she described as colorful, a little retro and sometimes a bit Palm Springs. Once she landed on it, she described brand themes in the brief, such as turning chaos into clarity and forward momentum, and generated images for each.

The step that makes the library work in Claude Design is naming. She titled every image by what it represents for the brand, so when she asks for "an image that speaks to chaos turning into clarity," Claude knows which file to pull. If you have an excellent human designer, she'd use them first. She doesn't, so she built it herself.

How do you troubleshoot Claude Design when output drifts?

Megan's post-it note for the session: the fault is rarely the tool, it's usually user error. Her checklist:

Symptom Fix
Pulls in old logos or off-brand styles Clean up the design system. It's a system and user error, not a Claude error.
Colors, type or spacing drift Set those rules in the design system. If drift continues, add an audit skill that checks for them specifically.
Invents new layouts Create templates, or name the approved layouts in your first prompt.
Build misses the brief Ask for a plan before it designs. "A plan is never a waste of time."
"Make it more on-brand" goes nowhere Say exactly what is off-brand.
Tries to modernize your existing brand Tell it to propose changes rather than make them.
Errors in the final asset Run a compliance check. Build an audit skill for your design system and check against the original brief.
The same mistakes keep coming back Probably context window drift. Start a new chat inside the project, or add a written rule.

You can also tell Claude to read the README before it starts, and build review skills that ask "does this match my design system?" Those are guardrails, and Megan recommends an audit on anything you make.

Should Claude Design replace Figma?

Megan doesn't think Figma is going away. She expects it to work differently, and it's still a great tool for designers. If your infrastructure is built there, don't throw it out and run to Claude. "Claude could disappear tomorrow." Connect it in and see what happens, but think first about what the tool is for, who uses it and the opportunity cost of dropping it. She covered the same question in a recent newsletter after a reader wanted to know whether to ditch their software and build it themselves. Her answer wasn't never. It was be intentional.

Key Takeaways for GTM Teams

  • Claude Design speeds up the middle, not the whole job. Strategy, briefs and review are still yours.
  • Invest in the design system first. Start with fonts, colors and logos, then add imagery, icons, templates and usage notes. This is what stops your output looking like everyone else's.
  • Use it when you need your real assets. Skills and plugins carry instructions. A design system carries your actual images, logos and icons.
  • Always start with a brief and use it as the thing you audit against.
  • Build the biggest asset first, then start a new chat and spin off derivatives from it.
  • Be specific when you edit. Use comments to point at exact elements, and ban the patterns you don't like (eyebrows included) in the system.
  • Expect 85 to 90 percent. It's probabilistic. A human still makes the final call and is still more creative.
  • When output drifts, look at your setup before you blame the tool.

Want to Attend the Next Session?

GTM Clawllective is a community where go-to-market operators show how they actually use AI at work, live. The discussion stays off the record so people can speak freely, and every recap includes the speaker's demo video. Come see the next build for yourself and join the community.


About the Speaker

Megan Ratcliff is a Partner at Clarity & Motion Collective. By her own description she is not a designer. She uses Claude Design to make ideas visible quickly and to produce on-brand campaign assets for a brand that is about a year old. She has also put together a Claude Design accessibility guide and writes a newsletter.

Her approach rests on doing the work before the tool: a clear brief, a well-built design system and a human who keeps judgment throughout.

Connect with Megan on LinkedIn or watch the session demo on Sessions Replay.

Watch the session replay: Claude Design for Marketers